Tracks and Motors

Patriarc ® Model 500

• models 500, 500-R, 501, 501-A, 502, 502-A
• 7 gauge extruded aluminum I-channel construction
• heavy duty
• all length curtains
• suspended attachment or ceiling mount
• 12″ carrier spacing
• especially designed for large and reverse curved auditorium stages
• normally used with a machine operator

“5000 Channel: 7 gauge extruded aluminum, unspliced lengths up to 20′. Custom-curved at jobsite. Minimum radius: 2′, approx. 1-5/8″w x 3-1/4″h: 1ft: 1-1/2 lbs.

5001 Nylon Ball-Bearing Single Carrier: Carrier spacing: 12″. Block constructed of plated steel supported from 2 nylon tired ball-bearing wheels. Plated swivel for free, effortless curtain movement. Rubber bumpers and nylon strips attached to carrier to assure quiet operation, width: 2 1/8″, wt: 12 oz.

5002 Master Carrier: Block constructed of plated steel supported from 4 nylon-tired ball-bearing wheels and including rubber bumper. Carrier width: 5-1/4″, wt: 3 lbs. 8 oz.

5003 Live End Pulley: Plated steel construction equipped with 2 oil-impregnated sleeve bearing 5″ diameter glass-filled nylon ball-bearing wheels. Anchors to track end. Extends beyond track 6″, width: 6-1/2″, wt: 8 lbs. 10 oz.

5004 Dead End Pulley: Plated steel construction equipped with 1 oil-impregnated sleeve-bearing 5″ diameter glass-filled nylon ball-bearing wheel. Attaches to track end, width: 5″, wt: 4 lbs. 14 oz.

5007 Lap Clamp: For attaching double-sectioned track at center overlap. Used with suspended tracks only, wt: 2 lbs. 4 oz.

5008 Hanging Clamp: (Sold in pairs.) Recommended spacing: 5′ with additional units at curves and in stack areas. Constructed of plated steel. Pipe batten recommended for track suspension. Adjustable to any location, ht: 4″, wt: 1 lb. 8 oz.

5009 End Stop: Prevents carriers from moving beyond selected position in track. Located at center overlap and track dead ends, wt: 2 oz.

5058 Cable Guide: Consists of nylon ball-bearing rollers for guiding cable along track channel. Drawing of track layout required when ordering to assure proper roller placement, wt: 1 lb. 10 oz.”

Tracks and Motors

Silent Steel® Model 280

• models 280,280-A,281,282,283-N,283-R
• 14 gauge galvanized fire proof steel (available in aluminum)
• heavy duty, 20-50 lbs per foot
• all length curtains
• 7′ suspended attachment
• 12″ carrier spacing
• approximate curtain stacking space per foot track: 2.4″
• includes standard accessory group: track channel, single carriers, master carriers, end pulleys, floor pulley, lapclamps, hanging clamps, end stops, operating cord

2800 Channel: 14 gauge galvanized steel, unspliced lengths to 26′, option of ceiling attachment approx. 3″ x 3″ 1 ft: 2 lbs 12 oz

2801 Single Carrier: black fire-proof nylon block, 2 heavy duty polyethylene wheels, plated swivel, heavy chain for curtain trimming width: (carrier + bumper) 2″, length: (top of carrier to end 5 chain links): 11″

2802 Master Carrier: plated steel block with two 2 wheeled ball-bearings and 2 cable clips to clamp cord to carrier width: 3 1/2″, length (top of carrier to end 5 chain links): 11″, wt: 14 oz

2803 Live End Pulley: steel block, 2 sleeve-bearing wheels, underhanging, anchorable w/o drilling width: 4″, wt: 3 lbs

2804 Dead End Pulley: steel block, 1 sleeve-bearing wheel, underhanging, anchorable w/o drilling width: 4″, wt: 1 lb 14 oz

2807 Lap Clamp: steel, use to attach double-sectioned track at center over-lap wt: 1 lb 6 oz

2808 Hanging Clamp: steel, use chain for track suspension, positionable, turnbuckles or pipe clamps suggested for long, heavy curtains spacing: 7′ 1 pr: 15 oz

2809 End Stop: sets boundary for carrier movement, use horizontally attached bolt with Pivot Arms wt: 4 oz

2824 Splicing Clamp: two piece 11 gauge clamp for joining and extending track, 12″l x 2 3/4″ w x 5 1/2″ h 1 pr: 6 lbs 4 oz

2828 Cord: fiberglass center and stretch-resistant, for manually operated tracks, No.8, 1/4″ d

2865 Tension Floor Pulley: 1 sleeve-bearing steel wheel, wall or floor mount, spring-loaded latch maintains wheel in uppermost position during cording 1.5″l x 3.5″w x 13″h; wt: 2 lbs

Tracks and Motors

BeSteel ® Model 170

• medium duty, 10-15 lbs per foot
• 36′, 45′ * maximum track length
• mount: ceiling, suspended
• maximum span between attachments
  ceiling mount: 18″ **
  track suspension: 6′
• 12″ carrier spacing
• approximate curtain stacking space per foot track: 1.5″
• includes standard accessories

Specific uses:

• heavy and high window curtains
• medium duty stage curtains

* 3 models, any length
** based on direct attachment of track channel to ceiling
1700 Channel: 14 gauge galvanized steel, unspliced lengths to 26′, option of ceiling attachment, approx. 2″ x 2″, 1 ft: 1lb 11 oz

1701 Single Carrier: plated steel block with 2 heavy duty polyethylene wheels width: 1 3/16″, spacing: 12″, wt: 2 oz

1702 Master Carrier: plated steel block with 4 wheels and 2 cord connectors width: 3″, wt: 4 oz

1703 Live End Pulley: steel block with 2 sleeve-bearing steel wheels, anchorable w/out drilling width: 3″, wt: 1 lb 1 oz

1704 Dead End Pulley: steel block with 1 sleeve-bearing steel wheel, anchorable w/out drilling width: 3″, wt: 11 oz

1707 Lap Clamp: attaches double-sectioned track at center over-lap, wt: 10 oz

1708 Hanging Clamp: plated steel, use chain for track suspension, positionable, recommended spacing: 6′; 1 pr: 7 oz

1709 End Stop: sets boundary for carrier movement, use horizontally attached bolt with Pivot Arms wt: 2 oz • 1724 Splicing Clamp: two piece 11 gauge clap for joining and extending track 12″l x 2″w x 3.75″h; 1 pr: 4 lbs •

1728 Cord: fiberglass center, stretch-resistant, for use with manually operated tracks No. 8, 1/4″ d 100 ft: 2 lbs 4 oz

2865 Tension Floor Pulley: 1 sleeve-bearing steel wheel, wall or floor mount, spring-loaded latch maintains wheel in uppermost position during cording 1.5″l x 3.5″w x 13″h; wt: 2 lbs

Tracks and Motors

Rig-I-Flex ® Model 140

• straight or curved on job site
• medium weight, 15 lbs maximum per foot
• 11 gauge extruded aluminum I-beam
• 75′ maximum track length
• mount: suspended, ceiling
• maximum span between attachment
  ceiling mount: 5′
  rack suspension: 4′
• 12″ carrier spacing
• approximate curtain stacking space per ft track: 1.8″
• includes standard accessories

Specific uses:

• heavy curtains on stages and TV studios
• industrial plant partitions

1400 Channel: 11 gauge extruded aluminum, mill-finish, unspliced lengths to 20′, curvable on site to minimum 2′ radius approx. 2 1/2″h x 1″w wt: 10 oz

4201 Single Carrier: steel block with 2 nylon-tired ball-bearing wheels, plated swivel, 2 rubber bumpers for noise reduction width: 1 3/8″, wt: 4 oz

1402 Master Carrier: pivoting steel block with 4 nylon-tired ball-bearing wheels, snap-on nylon spacers for noise reduction, 2 cord connectors to clamp cord to carrier width: 3 1/4″, wt: 13 oz

1403 Live End Pulley: black steel block with 2 sleeve-bearing steel wheels, use at track end width: 7″, wt: 2 1/2 lbs

1404 Dead End Pulley: black steel block with 1 sleeve-bearing steel wheel, anchor at track end width: 5 1/4″, wt: 1 lb 6 oz

1407 Lap Clamp: steel, use to attach double-sectioned track at center overlap wt: 7 oz

1409 End Stop: restricts carrier movement, acts as cord guide width: 1 3/8″, wt: 2 oz

1423 Ceiling Clamp: adjustable to any location, mount top plate then install channel, spacing: 5′, also on curves wt: 6 oz

2865 Tension Floor Pulley: steel, 1 sleeve-bearing wheel, tension spring, spring-loaded latch, wall or floor mount width: 3 1/2″, length: 1 1/2″ height: 13″, wt: 2 lbs

4208 Hanging Clamp: steel, moveable, attach with pipe clamps for strongest bracing spacing: 4′, at all splices and curves; 1 pr: 2 1/2 oz

4224 Splicing Clamp: steel, use to join or extend track section, ensures proper vertical and horizontal alignment, use at straight channel only width: 1″, length: 8 1/4″ 1 pr: 11 oz

Tracks and Motors

SpeciFine ® Model 113

• lightweight, 4 lbs maximum per foot
• 16 gauge extruded aluminum
• 20′ maximum track length
• mount: ceiling, suspended, wall
• 6″ carrier spacing
• approximate curtain stacking space
  per f00t track: 2.5″
• maximum span between attachments
  ceiling mount: 12″ *
  track suspension: 4′
• operating cord concealed within track
• tension floor pulley and standard accessories

Specific uses:

• long classroom and residential windows
• high windows in churches, banks, hospitals

* based on direct attachment of track channel to ceiling

1100 Channel: 16 gauge extruded aluminum, anodized finish, unspliced lengths to 20′, dovetail design of channel’s exterior allows plaster to seep into slot approx. 1 1/4″ x 7/8″, 1 ft: 5 oz

1131 Single Carrier: “bumper-to-bumper” block with 2 polyethylene wheels, plated swivel width: 13/16″, wt: 1 oz

1132 Master Carrier: adjustable extension arm has 4 polyethylene wheels, provides 8″ max overlap, width: approx. 7 1/2″ wt: 2 1/2 oz

1133 Live End Pulley: 2 nylon ballbearing wheels, insert at track end functions as End Stop, extends 1 1/2″ beyond track end width: approx. 1 1/4″, wt: 2 oz

1134 Dead End Pulley: 1 nylon ball-bearing wheel, same block as Live End width: approx. 1 1/4″ wt: 1 1/2 oz

1135 Tension Floor Pulley:
1 nylon ball-bearing wheel, tension spring provides cord tautness
1″l x 3/4″w x 7″h, wt: 3 oz

1138 Hanging Clamp: adjustable to any location, suspend track with chain or cable, spacing: 4′, 1 pr: 1 oz